Direct factory 5mm 75mmx75mm Galvanized welded gabion Featured Image

Umzi-mveliso ngqo 5mm 75mmx75mm Galvanized welded gabion

Inkcazelo emfutshane:

Thumela i-imeyile Khuphela

Iinkcukacha zeMveliso

FAQ

Iithegi zeMveliso

Isishwankathelo

Iinkcukacha eziKhawulezayo

Indawo yemvelaphi:: Hebei, China

Igama lebrand:: IJINSHI

Inombolo yoMfanekiso:: JSWGB

Izinto:: I-Low-Carbon Iron Wire, ucingo lwentsimbi yekhathoni ephantsi, ucingo lwentsimbi oluyiGalvanized

Uhlobo:: I-Welded Mesh

Isicelo:: Gabions

Imilo yomngxuma:: Isikwere, isikwere

Imbobo:: 50x50mm 50x100mm

Isilinganisi socingo:: 3mm 4mm 5mm

Igama lemveliso:

Umzi-mveliso ngqo 5mm 75mmx75mm Galvanized welded gabion

Umnatha:

50x50mm 75x75mm 50x100mm

Ububanzi:

3mm 4mm 5mm

Ubungakanani:

1x1x1m 1x2x1m

Unyango lomphezulu:

Ifakwe igalvanized okanye ipvc

Ukupakisha:

kwiPallet okanye kwibhokisi

Tensile strength:

380-550 N/MM2

Izibuko:

Xingang

Supply Ability

2000 iSeti/iSeti ngeVeki nganye

Ukupakishwa kunye nokuhanjiswa

Iinkcukacha zokuPakisha: irajwe ngefilimu ecuthekileyo okanye epakishwe kwipalethi

Izibuko: XINGANG

Umzi-mveliso ngqo 5mm 75mmx75mm Galvanized welded gabion

Ingcaciso yeMveliso

1.Inkcazelo:

I-Welded Gabion yenziwe ngocingo lwentsimbi oluzotyiweyo olubandayo kwaye ihambelana ngokungqongqo neBS1052:1986 yamandla okuqina.Emva koko idityaniswe ngombane kunye kunye neHot Dip Galvanized okanye i-Alu-Zinc ifakwe kwi-BS443/EN10244-2, iqinisekisa ubomi obude.Iimeshes ke zinokuthi zigqunywe ipholima ephilayo ukukhusela umhlwa kunye nezinye iziphumo zemozulu, ngakumbi xa iza kusetyenziswa kwindawo enetyuwa kunye nokungcoliseke kakhulu.Umnatha wethu weAlu-Zinc* ugqunywe kusetyenziswa inkqubo yeGalfan.

Izinto ze-Welded Gabion ziyi-Hot dipped wire galvanized wire, i-Galfan wire.

Ubungakanani beBhokisi yeGabion	0.5x1x1m	1x1x1m	1x1.5x1m	1x2x1m
Ububanzi bocingo	3mm	4mm	5mm	6mm
Ububanzi bocingo	Isimbo seingcingo ezithe tyaba ezimbini siyafumaneka
Ubungakanani beMesh Hole	50x50mm	50x100mm	37.5x100mm	75x75mm
Ezinye iinkcukacha ziyafumaneka

Iinkcazo eziqhelekileyoye welded gabion
Umngxuma (cm)	Idayamitha yocingo(mm)	Ubungakanani bebhokisi yegabion(m)
5×7	2.4	0.5×0.5×1
5×7	2.7	1×1×1
5×10	3.5	1×1×2
Ingcaciso engentla ingatshintshwa ngokoyilo lweprojekthi

Isicelo:

1.)Ukukhutshwa kwezikhukula kunye nokuhamba kwelothe

2.)Iwawa likhusela

3.)Ukuthintela ukulahleka kwamanzi nomhlaba

4.)Ukukhusela ibhulorho

5.)Ukuqinisa ilaphu

6.)Iprojekthi yokubuyisela unxweme

7.)Iprojekthi yolwandle

8.)Block udonga

9.)Ukukhusela indlela

Ukuqhubela phambili kwebhokisi ye-gabion edityanisiweyo kunebhokisi ye-hex ye-gabion

1.Umnatha we-welding stone cage umphezulu umtyibilizi kwaye ucocekile, umnatha ofanayo, i-solder joint yomelele, inokomelela olomeleleyo, i-corrosion resistance, i-permeability kunye nemfezeko.

2. Wire gabion network ixabiso eliphantsi, kulula ukuyifaka, lolona khetho lufanelekileyo lomhombiso wegadi, ukukhuselwa kwamahlathi kwi-slope.

3. Kukho ukunyamezela okunamandla umonakalo wendalo kunye nokukwazi ukuxhathisa impembelelo yemozulu embi

4. Ufakelo lweeyure zokusebenza zocingo oludityanisiweyo lwegabion kunehexagon yehexagon yelitye lomnatha longe i-40%.Xa kuthelekiswa nehexagonal wire gabion mesh, i-welded wire gabion mesh inokugcina "ikheji" ngcono.Xa isihluzi sizaliswe ngocingo oludityanisiweyo lwe-gabion mesh panel convex concave, gcina umcaba, ungafani nomnatha wehexagon wekheji yelitye, ukuze ndikwazi ngcono

Ukupakishwa kunye nokuThunyelwa

Ngokuqhelekileyo ukupakisha kwi-pallet okanye njengesicelo sakho.

Ulwazi lweNkampani

FAQ

1. Uyiodola njani i-Welded Gabion yakho?
a) Idayamitha kunye nobungakanani bemesh.
b) qinisekisa ubungakanani bomyalelo
c) imathiriyeli kunye nodidi lwetratement yomphezulu

2. Ixesha lokuhlawula
a) TT
b) LC EKUBENI
c) imali
d) I-30% ixabiso loqhagamshelwano njengediphozithi, i-blance 70% ihlawulwe emva kokufumana ikopi ye-bl.

3. Ixesha lokuhambisa
a) Kwiintsuku ezingama-19-25 emva kokuba ufumene idiphozithi yakho.

4. Yintoni i-MOQ?
a) Iiseti ezili-10 njenge-MOQ, sinokuvelisa isampuli kuwe.
5.Ungakwazi ukubonelela ngeesampuli?
a) Ewe, singakunika iisampuli zasimahla

Ngaphambili: WPC gabion isihlalo isihlalo ilitye ibhaskithi ibhokisi gabion

Okulandelayo: uyilo lwebhentshi yegadi yegabion

1. Ngaba unokunikela ngesampulu yasimahla?
UHebei Jinshi unokukunika isampuli yasimahla ekumgangatho ophezulu
2. Ngaba ungumenzi?
Ewe, besisoloko sibonelela ngeemveliso zobungcali kwindawo yocingo iminyaka eyi-10.
3. Ndiyakwazi ukwenza iimveliso?
Ewe, ukuba nje ukubonelela ngeenkcukacha, imizobo inokwenza kuphela oko ufuna iimveliso.
4.Njani malunga nexesha lokuhambisa?
Ngokwesiqhelo phakathi kweentsuku ezili-15-20, iodolo elungiselelweyo inokufuna ixesha elide.
5. Kuthekani ngemiqathango yentlawulo?
T / T (kunye ne-30% yediphozithi), L / C ekuboneni.Uwestern Union.
Nayiphi na imibuzo, nceda uzive ukhululekile ukuqhagamshelana nathi.Siza kukuphendula kwiiyure ezisi-8.Enkosi!