WECHAT

Iziko leMveliso

Ilaphu le-Hardware eyi-intshi eyi-1/8.

Inkcazelo emfutshane:


  • sns01
  • sns02
  • sns03
  • sns04

Iinkcukacha zeMveliso

FAQ

Iithegi zeMveliso

Isishwankathelo
Iinkcukacha eziKhawulezayo
Indawo yemvelaphi:
Hebei, China
Igama lebrand:
Sino-diamond
Inombolo yoMfanekiso:
JSW-01
Izinto:
ngocingo lwentsimbi, ucingo lwentsimbi
Uhlobo:
I-Welded Mesh
Isicelo:
Umnatha wocingo woKwakha, ikhaya, iyadi, igadi kunye nevenkile
Imilo yomngxuma:
Isikwere
Isilinganisi socingo:
2.0-4.0mm
Unyango lomphezulu:
Ilaphu leHardware elilukiweyo
Ububanzi:
0.4
Ubude:
0.5m-100m
Ukuhanjiswa:
Imiqulu
Ukupakisha:
iphepha elingangeni manzi okanye iPlastiki
Ubunzima:
2kg
Supply Ability
1000 Roll/Rolls ngenyanga

Ukupakishwa kunye nokuhanjiswa
Iinkcukacha zokuPakisha
iphepha elingangeni manzi
Izibuko
Izibuko laseTianjin

Ixesha lokukhokhela:
Ubuninzi (Imiqulu) 1 – 500 501 - 5000 >5000
Est.Ixesha (iintsuku) 20 30 Kuza kuthethathethwana

Ingcaciso yeMveliso

I-36in x 50ft 1/8 intshi ye-Hardware ilaphu
Imifanekiso eneenkcukacha
* Imilinganiselo: Imiyinge yomqulu 36in, ubude bubonke 50ft.Iimpawu ze-1/8-intshi yokuvuleka.Iza yaqengqeleka ukuze kube lula ukuhamba kunye nokugcinwa.
* Izinto eziZinzileyo: Zenziwe kwi-27-Gauge yocingo lwentsimbi.Iimveliso zethu zenziwe ngegalvan EMVA kokuba zilukiwe, igalvanizing yediphu eshushu
eyona ndlela isebenzayo yokulibazisa ukubola kwezinto zentsimbi.I-1/8" ilaphu le-hardware ngumgangatho wezixhobo ezininzi
ukukhupha umoya okanye ukulawula ukufikelela.
* Ukusetyenziswa kwenjongo ezininzi: I-1/8 ye-intshi ye-hardware ilaphu, ilungele ukugcina iinyosi, yenza imigibe yeembovane.I-1/8" yocingo lwentsimbi ekhandiweyo ubukhulu obukhulu phakathi
ukuba inkulu ngokwaneleyo ukufumana ukugeleza komoya okufanelekileyo kodwa incinci ngokwaneleyo ukugcina iinyosi, oonomeva, kunye nokunye okuninzi phakathi ukuya.
izinambuzane ezinkulu.
* I-Mesh efanelekileyo: Imingxuma yi-1/8 kuphela "yokwenza iibhodi ezisezantsi ezikhuselweyo kwiinyosi zeenyosi. Iinyosi azikwazi ukuhamba nge-1/8" yokuvuleka.
Kulula ukusebenzisana kunye kwaye kuya kugcina iintaka zikhuselekile kunokuba usebenzisa i-mesh enkulu okanye ukuhlolwa kwefestile.
* Ubungqina beGalvanized kunye neRust: Ilaphu lehardware elinezinki eliphindwe kabini ukuze lixhathise umhlwa kunye nobomi obude.Ukulukwa okubanzi hayi kakhulu
iqinile, imathiriyeli iya kuhambelana nokumila okuqengqelekayo njengabagadi bemithi yeziqhamo, igeyiji engama-27 kulula ukuyibeka kwaye kulula ukuyisika.
ucingo lokusika/isikere.


Isicelo

Ilaphu le-1/8 leHardware-iGalvanized emva koLukiweyo

* Ilaphu le-intshi ye-1/8, ilungele ukugcina iinyosi, yenza imigibe yeembovane.
* I-1/8" ilaphu le-hardware ukwenza iibhodi ezisezantsi ezikhuselweyo kwiinyosi zeenyosi. Iinyosi azikwazi ukuhamba nge-1/8 "ukuvuleka.
• Kulula ukusebenza kunye kwaye kuya kugcina iintaka zikhuseleke ngakumbi kunokusebenzisa i-mesh enkulu okanye isikrini sefestile.
* I-1/8" yocingo lwentsimbi ekhandiweyo ngobukhulu kuba inkulu ngokwaneleyo ukufumana umoya ofanelekileyo kodwa incinci ngokwaneleyo ukugcina iinyosi, oonomeva, kunye nezinye izinambuzane eziphakathi ukuya ezinkulu.


Ukupakisha kunye nokuhanjiswa

Iphepha elingangenwa manzi elineleyibhile yabathengi.
Inkampani yethu





  • Ngaphambili:
  • Okulandelayo:

  • 1. Ngaba unokunikela ngesampulu yasimahla?
    UHebei Jinshi unokukunika isampuli yasimahla ekumgangatho ophezulu
    2. Ngaba ungumenzi?
    Ewe, besisoloko sibonelela ngeemveliso zobungcali kwindawo yocingo iminyaka eyi-10.
    3. Ndiyakwazi ukwenza iimveliso?
    Ewe, ukuba nje ukubonelela ngeenkcukacha, imizobo inokwenza kuphela oko ufuna iimveliso.
    4.Kunjani malunga nexesha lokuhambisa?
    Ngokwesiqhelo phakathi kweentsuku ezili-15-20, iodolo elungiselelweyo inokufuna ixesha elide.
    5. Kuthekani ngemiqathango yentlawulo?
    T / T (kunye ne-30% yediphozithi), L / C ekuboneni.Uwestern Union.
    Nayiphi na imibuzo, nceda uzive ukhululekile ukuqhagamshelana nathi.Siza kukuphendula kwiiyure ezisi-8.Enkosi!

    Bhala umyalezo wakho apha kwaye uwuthumele kuthi