Ụlọ ọrụ mmepụta ihe owuwu na ndị na-ebunye ihe owuwu ogige holland nke China nke nwere PVC 1.5x20m

Ogige holland nke a kpụchara akpụ nke PVC nke dị mita 1.5x20

Nkọwa Dị Mkpirikpi:

Zipu ozi-e Budata

Nkọwa Ngwaahịa

Ajụjụ Ndị A Na-ajụkarị

Akara Ngwaahịa

Nchịkọta

Nkọwa Ngwa Ngwa

Ebe Mmalite:: Hebei, Chaịna

Aha njirimara:: JINSHI

Nọmba ihe nlereanya:: JINSHI

Ihe:: Waya Ígwè Galvanized, Waya Ígwè Galvanized

Ụdị:: Ntucha a gbanyere agbanye

Ngwa:: Mwube waya ntupu

Ọdịdị Oghere:: Akụkụ anọ

Ihe nlele waya:: 2mm-4mm

Aha ngwaahịa:

ogige euro

Agba:

akwụkwọ ndụ akwụkwọ ndụ, aja aja

Nha:

1.5x20m

Mmepe mesh:

50x100mm, 50x50mm

Ike ọkọnọ

Mpịakọta/Mpịakọta 2000 kwa izu

Nkwakọ ngwaahịa na nnyefe

Nkọwa Nkwakọ ngwaahịa: akwụkwọ plastik

Ọdụ ụgbọ mmiri: Tianjin

Etiti oge:

Ọnụọgụ (Mpịakọta)	1 – 50	>50
Oge e mere atụmatụ (ụbọchị)	20	A ga-akparịta ụka

Nkọwa Ngwaahịa

Ogige Euro nke Holland

1. Ogige Euro

Site na iji mkpanaka ígwè dị elu dị ka ihe eji arụ ọrụ, panel a na-agbakọta ma ọ bụ ogige a na-agbagharị agbagharị, mgbe e mechara Galvanization, a na-etinye ntụ ntụ PVC n'ime ihe mkpuchi; ọ nwere ike iguzogide radieshon na-emebi emebi na ultraviolet nke ukwuu.

2.Ogidi mgbidi Euro a mapụtara

Tubes pụrụ iche nke eroE ji ihe mkpuchi plastik mee ya nke ọma ma dị mma, nke e ji ihe mkpuchi Galvanized na Powder kpuchie elu ya, ma ọ bụ ihe mkpuchi ntụ ntụ mee. Ọ na-ejikarị usoro ntinye eli ogwe ndị ọzọ dị sentimita 50 n'ogologo n'ime ala. Enwere ike inye nha pụrụ iche dịka arịrịọ onye ahịa si dị.

3. Ihe mgbakwunye
A na-ejikọta panel na ogidi ndị a na ihe mkpuchi plastik pụrụ iche ma ọ bụ waya ígwè siri ike. Ha dị mfe ịwụnye, ha dịkwa ezigbo mma.
Nkọwapụta ogige Euro

Ntucha			Dayameta waya
Na Inchi	Na MM
2" X 2"	50.8 X 50.8	1.3mm-1.7mm
2" X 2"	50.8 X 50.8	1.6mm-2.0 mm
2" X 2"	50.8 X 50.8	2.0mm-2.5mm
2" X 2"	50.8 X 50.8	2.2mm-2.7mm
2" X 2"	50.8 X 50.8	2.5mm-3.0mm
2" X2"	50.8 X 50.8	3.0mm-3.5mm
2" X 4"	50.8 X 100	1.7mm-2.1mm
2" X 4"	50.8 X 100	2.0mm-2.5mm
2" X 4"	50.8 X 100	2.5mm-3.0mm

atụmatụ

Atụmatụ:
Ọ dị elu, siri ike, na-adịgide adịgide ma na-adịgide adịgide.
Mpempe ígwè a kpụchara akpụcha nke PVC.
Ihe eji eme ya: PVC Mesh Steel Mesh nke a kpụchara akpụcha
Dayameta nke ntupu: 2 mm
Nha Grid: 7.5cm * 10cm
Nha: 0.6*10M/ 0.6*20M/0.9*10M /0.9*20M/1.2*10M/1.2*20M/1.5*10M/1.5*20M/1.8*10M/1.8*20M
Uwe: ogige ọkụkọ, ogige ubi na nchekwa ubi
I nwere ike itinye nha kwesịrị ekwesị ka ọ dabara na mkpa gị.

Ngwa

Ogige euro a kpụchara akpụ nke PVC na-enye ngwọta siri ike ma dị ọnụ ala iji chebe ma chekwaa ebe ọ ka na-ekwe ka a hụ ya.
A na-eji ya eme ihe n'ụdị ụlọ ọrụ niile, gụnyere ụlọ na ọrụ ugbo. E nwere ọtụtụ ngwa dị iche iche, a na-ejikwa ya eme ihe n'ọtụtụ nha waya. Ọ nwere ike ịbụ agba onwe ya.

Enwere ike iji ya:1. Ogige mgbochi 2. Ogige na ogige 3. Ụzọ okporo ụzọ ma ọ bụ ụgbọ okporo ígwè.4. Ala ugbo Mpempe akwụkwọ ụlọ ọrụ mmepụta ihe ma ọ bụ obodo.5. Ndị nche ikuku

Nkwakọ ngwaahịa na nnyefe

Ụlọ ọrụ anyị

Nke gara aga: PE mmanụma plastik nchekwa ntupu, ogige nchekwa plastik oroma-acha ọbara ọbara

Osote: Oche Rebar nke simenti dị ọnụ ala maka owuwu emere na China (ụlọ ọrụ mmepụta ihe)

1. Ị nwere ike inye ihe nlele n'efu?
Hebei Jinshi nwere ike inye gị ihe nlele efu dị elu
2. Ị bụ onye nrụpụta ihe?
Ee, anyị anọwo na-enye ngwaahịa ọkachamara na ubi ogige ruo afọ 17.
3. Enwere m ike ịhazi ngwaahịa ndị ahụ?
Ee, ọ bụrụhaala na e nyere nkọwapụta, eserese nwere ike ime naanị ihe ịchọrọ ngwaahịa.
4. Kedu maka oge nnyefe?
N'ime ụbọchị 15-20, usoro ahaziri ahazi nwere ike ịchọ ogologo oge.
5. Kedu maka usoro ịkwụ ụgwọ?
T/T (na nkwụnye ego 30%), L/C dị na anya. Western Union.
Ọ bụrụ na ị nwere ajụjụ ọ bụla, biko kpọtụrụ anyị. Anyị ga-aza gị n'ime awa asatọ. Daalụ!