Cibiyar Samfura

Takaddun Shaidar Samfuri

Takaddun CE.

Inganci daga 2016-06-14 har zuwa 2049-12-31

Akwatin Gabion mai walda da aka yi da galvanized da kuma gabion mai zagaye da aka yi da welda don lambu

Bayani:

Gabion mai waldaAna ƙera su ne daga waya mai sanyi da aka zana kuma suna bin ƙa'idodin da suka dace

BS1052:1986 don ƙarfin tauri. Sannan a haɗa shi da wutar lantarki sannan a haɗa shi da ruwan zafi.

ko kuma a shafa Alu-Zinc a kan BS443/EN10244-2, wanda hakan zai tabbatar da tsawon rai. Sannan za a iya shafa ragar a kan polymer na halitta don kare shi daga tsatsa da sauran tasirin yanayi, musamman lokacin da za a yi amfani da shi a cikin muhalli mai gishiri da gurɓataccen yanayi. Ana shafa ragar Alu-Zinc* ɗinmu ta amfani da tsarin Galfan.

Za a samar da wayar lacing daban don haɗa wurin. Lacing Spirals an yi su ne da Alu-Zinc kuma ana samun zoben C na bakin ƙarfe akan ƙarin farashi idan ana buƙata.

An tsara dukkan ragar da aka yi da foda mai rufi da aka yi da Organic Polymer don su yi daidai da buƙatun DETR, HA MCHW, Volume 1 Bayani dalla-dalla na Ayyukan Babbar Hanya, Sashe na 626.

  Yana dawanda ya ƙunshiallon raga mai waldakumawaya mai lanƙwasa ta ƙarfe mai kauri.

Siffofi:

1. Kawai a cika dutsen a cikin gabions sannan a rufe shi.
2. Sauƙin shigarwa. Babu buƙatar fasaha ta musamman.
3. Yana da kariya daga yanayi a ƙarƙashin halaka ta halitta, kuma yana da juriya ga lalata.
4. Lalacewar da ke cikin duwatsu yana da kyau ga shuka. An haɗa shi don samar da daidaito da muhallin halitta.
5. Kyakkyawan shiga zai iya hana lalacewa ta hanyar hydrostatic.
6. Rage jigilar kaya. Ana iya naɗe shi tare don jigilar kaya da kuma ƙarin shigarwa.
7. Babu rugujewa koda a ƙarƙashin babban ikon nakasa.

Bayani dalla-dalla:

Lura:

1.) Juriyar da ke sama ta yi daidai da daidaitaccen EN10223-2:1997;
2.) Mafi ƙarancin Galvanization yana samuwa ne kawai don diamita na waya na yau da kullun kamar yadda aka tsara daban a cikin ginshiƙi don bayaninka; 

Yadda ake shigar da ragar gabion da aka welded? 

Mataki na 1An sanya ƙarshen, diaphragms, bangarorin gaba da baya a tsaye a ƙasan sashin ragar waya.

Mataki na 2.A tabbatar da bangarorin ta hanyar haɗa maƙallan karkace ta cikin ramukan raga a cikin bangarorin da ke kusa.

Mataki na 3.Za a sanya na'urorin ƙarfafawa a kan kusurwoyi, a nisan milimita 300 daga kusurwar. Ana samar da abin ƙarfafawa na diagonal, sannan a ɗaure shi a kan layi sannan a haɗa wayoyi a fuskokin gaba da na gefe. Ba a buƙatar kowane abu a cikin ƙwayoyin ciki. 

Mataki na 4.Akwatin Gabion cike yake da dutse mai daraja da hannu ko kuma shebur. 

Mataki na 5.Bayan an cika, a rufe murfin a kuma ɗaure shi da maƙallan juyawa a kan diaphragms, ƙarshensu, gaba da baya. 

Mataki na 6Lokacin da ake tara matakan ragar gabion da aka haɗa, murfin ƙasan matakin na iya zama tushen matakin sama. A ɗaure shi da maƙallan juyawa kuma a ƙara maƙallan da aka riga aka ƙera a cikin ƙwayoyin waje kafin a cika shi da duwatsu masu daraja. 

Aikace-aikacen akwatunan Gabion da aka welded:

1. kula da ambaliyar ruwa

2. kayan ado na lambu

3. Amfani da gini

4. shingen fashewa