Cibiyar Samfura

Ramin waya na gabion mai walda

1. Gabion ɗin ƙarfe da aka haɗa da raga ta waya kwantena ne na raga ta waya da aka haɗa da raga ta ƙarfe mai inganci. Ana iya cika su a wurin da kayan dutse masu ƙarfi don samar da tsarin riƙe nauyi. Saboda rashin sassaucinsu, gabion ɗin da aka haɗa ba za su iya daidaitawa da bambancin wurin zama ko amfani da su a cikin magudanar ruwa ba. Idan aka kwatanta da gabion ɗin waya da aka saka, gabion ɗin da aka haɗa suna ba da ƙarfi mafi girma. Domin biyan buƙatun aiki daban-daban, akwai nau'ikan diamita na waya da girman raka'a don akwatunan gabion da aka haɗa.

2. Bayanin Fasaha na Gabion da aka Walda:
1. Girman Rata: Buɗewar raga ya kamata ta zama murabba'i mai girman 76.2mm a kan grid ɗin,

Sauran buɗewa: 37.5x75mm, 50x50mm, 75x75mm, 100x50mm, 100x100mm duk suna samuwa.
2. Wayar Raga: Ya kamata diamita na waya ya kasance daga 3.0mm zuwa 4.0mm, sauran waya daga 2.5mm zuwa 6mm za a iya samar da su kamar yadda aka buƙata.
3. Girman da aka saba: 2mx1mx1m, 2mx 1mx0.5m, 1mx1mx1m, 1mx1mx0.5m, 1.5mx1mx1m
4. Maganin Fuskar Sama: Rufin aluminum 95% na zinc 5% don juriya ga tsatsa, kuma an yi amfani da galvanized mai zafi sosai.
5. Haɗawa: An haɗa shi da maɓallan bakin ƙarfe waɗanda ke haɗa bangarorin gefe da diaphragms zuwa ga allon tushe

6. Haɗawa: Ya kamata a samar da akwatin gabion da aka haɗa da waya mai lanƙwasa, (zoben C ko hinge mai karkace,) ƙusoshin kusurwa, fil ɗin kullewa don haɗa wurin, wanda ya kamata ya zama mafi ƙarancin diamita na waya 2.2mm ko 3mm don haɗawa na ƙarshe.

3. Bayani dalla-dalla na gabion ɗin da aka haɗa

4. Manyan Aikace-aikacen Gabion da aka Welded:

1. Rike gine-ginen bango,

2. Rigakafin kamuwa da zaizayar ƙasa da kuma lalata ƙasa a yanzu
3. Kariyar gada,

4. Tsarin ruwa, madatsun ruwa da magudanar ruwa
5. Kariyar bakin teku,

6. Rigakafin faɗuwar duwatsu da kuma kare zaizayar ƙasa