Product Center

Connected by Spiral Wire, Stiffener and Pin.

4.How to install welded gabion mesh?

Step 1. Ends, diaphragms, front and back panels are placed upright on the bottom section of wire mesh. 

Step 2. Secure panels by screwing spiral binders through the mesh openings in adjacent panels.

Step 3. Stiffeners shall be placed across the corners, at 300mm from the corner. Providing a diagonal bracing, and crimped over the line and cross wires on the front and side faces. None are needed in interior cells.

Step 4. Gabion box is filled with graded stone by hand or with a shovel.

Step 5. After filling, close the lid and secure with spiral binders at the diaphragms, ends, front and back.

Step 6. When stacking tiers of the welded gabion mesh, the lid of the lower tier may serve as the base of the upper tier. Secure with spiral binders and add pre-formed stiffeners to exterior cells before filling with graded stones.

5.Advantage

a. Easy to install

b. High zinc coating thus anti-rust and anti-corrosive

c. Low cost

d. High security

e. Colorful stones and shells etc can be used with gabion mesh to make beautiful appearance

f. Can be made into various shapes for decoration

6.Application

welded gabion mesh is widely used for the control and guide of water; preventing of rock breaking; water and soil, roadway and bridge protection; strengthening structure of soil; protection engineering of seaside area and retaining wall structures; hydraulic structures, dams and culverts; coastal embankment works; architectural feature retaining walls.The main application as follows:

a. Control and guide of water or flood

b. Flood bank or guiding bank

c. Preventing of rock breaking

d. Water and soil protection

e. Bridge protection

f. Strengthening structure of soil

g. Protection engineering of seaside area

7. Our product safety compliance certificate

8. Container Capacity:

About 3500-4000 square meters for 20′ GP container, and 25-26 tons for 40′ HQ, according to the specifications.