Labarai - Nau'ikan kayan haɗin shinge na sarkar
English
WECHAT

labarai

Waɗanne nau'ikan kayan haɗin shinge na sarkar suna samuwa?

Kayan aikin shinge na sarkar sarkar

1. Murfin bayan gida
2. Ƙungiyar tashin hankali
3. Madaurin ɗaurewa
4. Sanda mai ƙarfi
5. Mai ɗaure truss
6. Mai jujjuyawa mai gajere
7. Mai hana damuwa
8. Maƙallin ƙofar namiji ko mace
9. Sanda mai shimfiɗawa
10. Hannun waya mai santsi: hannu ɗaya ko hannun V
11. Maƙallin cokali mai yatsu na ƙofa
12. Hinjiyar ƙofar namiji ko mace
13. tayoyin roba
14. farantin flange
15. mai ɗaurewa
16. sandar truss

Ƙayyadewa

Yadin shinge mai sarka: Girman ramin 2″(50mm), waya mai galvanized BWG 12 (2.7mm), gefen da aka ɗaure.

Firam ɗin bututu masu zagaye: galvanized

An kuma haɗa kayan haɗin da aka yi da galvanized, an haɗa da sandunan matsin lamba, maƙallan, hinges, maƙallan kulle, da sandunan saukewa (don ƙofofi biyu).

Tsawon ƙofa: 4'-8' (1.2m-2.4m)

Faɗin ƙofa: 3'-12' (0.9m-3.66m)

Keɓancewa akwai.

 
 
Za ka iya ƙara abin ƙarfafa gwiwa na tsakiya ko kuma abin ƙarfafa gwiwa na tsaye a ƙofar.

Ƙofofin suna da kusan 2″ (50mm) gajarta fiye da tsayin da aka nuna don ba da damar sarari a ƙarƙashin ƙasa. Ƙofofin suna da kusan 3-3/4″ kunkuntar fiye da faɗin da aka nuna don ba da damar kayan aiki. Yi amfani da ganye biyu don yin ƙofar juyawa biyu na faɗin da ake so. Ana iya ƙara ƙarin waya mai kauri.

1. Takaitaccen bayani game da shingen sarkar

Kayan aiki: Wayar ƙarfe mai laushi mai inganci, wayar bakin ƙarfe, wayar ƙarfe mai ƙarfe, wayoyin PVC, wayar galvanized.

Nau'in Shinge: Shingen haɗin sarka mai galvanized, shingen haɗin sarka mai rufi da PVC, shingen haɗin sarka mai bakin ƙarfe.

 
Filin Haɗin Sarkar Galvanized
Kayan aiki: waya mai inganci mai ƙarfi, waya mai laushi ta ƙarfe, waya mai ƙarfe ta aluminum, waya mai ƙarfe.
Maganin Surface: An yi amfani da electro galvanized, an tsoma shi da ruwan zafi.
Buɗewa
(mm)
1"
1.5"
2"
2-1/4"
2-3/8"
2-1/2"
2-5/8"
3"
4"
25
40
50
57
60
64
67
75
100
Diamita na waya
18#-13#
16#-18#
18#-7#
1.2-2.4mm
1.6-4.2mm
2.0-5.0mm
Tsawon/birgima
0.50m-5.0m (zai iya zama mafi tsayi)
Faɗi
0.5m-5.0m
Ana iya yin kayayyaki da bayanai dalla-dalla kamar yadda ake buƙata.

Bakin Karfe Sarkar Link Shinge

Shingen haɗin sarkar bakin ƙarfe shine shingen haɗin sarkar mafi ɗorewa idan aka kwatanta da shingen haɗin sarkar galvanized da shingen haɗin sarkar da aka rufe da filastik.
Kayan aiki: 201, 302, 304, 304L, waya mai bakin karfe 316, wayar da ba ta da ƙarancin carbon.
Siffofi: juriyar acid, juriyar alkali, juriyar zafin jiki mai yawa da juriyar yanayi.
Bayani dalla-dalla:
Diamita na waya: 1.2-5mm.
Buɗewar raga: 25, 40, 55, 60, 65, 76 da 100. Ana iya samun takamaiman bayanai.

PVC Sarkar Link Shinge

An saka shingen haɗin sarkar PVC daidai da waya ta PVC.
Kayan aiki: Wayar PVC, wayar bakin karfe, wayar ƙarfe mai ƙarancin carbon, wayar galvanized, wayar ƙarfe da sauransu.
Launuka: kore, fari, baƙi, launin ruwan kasa. Ana iya zaɓar launukan bisa ga buƙatar abokan ciniki.
Maganin gamawa: feshi, an rufe shi da filastik da kuma tsoma shi.
Tsawo (m)
0.9
1.2
1.4
1.8
2.0
2.4
2.75
3.0
Buɗewa (mm)
50×1.70/2.50;50×2.24/3.15;50×2.50/3.55;50×3.55/4.75.
Tsawon birgima
12.5/25(m)
Launuka
Baƙi, fari, kore, launin ruwan kasa, kamar yadda abokan ciniki suka buƙata.

2. Na'urorin haɗi na shingen haɗin sarka

1) Ana amfani da madaurin tashin hankali don haɗa sandunan tashin hankali zuwa madaurin tasha.
— Girman Daidaitacce (gauge 14 x 3/4″).
—Ya haɗa da 5/16″ x 1 1/4″ ƙwanƙwasa tare da goro.
—Ya dace da girman 1 3/8″ OD* OD – Diamita na waje na sandar.

2) Ana amfani da madaurin ƙarfe don haɗa kofunan Rail End, Masu riƙe sandar Truss, Wayar Tushe da Wayar Barb zuwa ginshiƙan Tashar.
— Girman Daidaitacce (gauge 14 x 3/4″).
—Ya haɗa da 5/16″ x 1 1/4″ ƙwanƙwasa tare da goro.
—Ya dace da shafi mai girman inci 1 3/8*.

3) Sandunan Tashin Hankali.
-Ana amfani da shi don riƙe matsin lamba a ƙarshen hanyar haɗin sarka.
- Yana buƙatar madaurin matsin lamba don haɗawa da sandar tashar.
– Gina Karfe Mai Galvanized.

4) Kofuna na ƙarshen layin dogo CONCAVE ADAPTR SASHE.
–Ana amfani da shi wajen haɗa layin saman zuwa murfin maƙallin harsashi (sku#0151).
– Amfani da Gidaje.
- Yana da kyau don yin haɗin saman layi mai kusurwa uku ko kusurwa mara kyau.

5) Murfin bayan gida na ALUM DOME HULAR SASHE——
- Ana amfani da shi don rufe saman sandunan haɗin sarka da sauran bututun zagaye.
–Ya dace da bututun 1 3/8″ OD*.
- Gina Gine-gine na Aluminum.

6) KASA KASA KASA KASA KASA --
- Don hanyar haɗin gidan zama.
- Ya dace da layin layi mai girman inci 1 5/8.
–Kafafun saman 1 3/8" sun dace da madauki.
- Ya dace da layin layi mai girman inci 1 5/8.
–Kafafun saman 1 5/8″ sun dace da madauki.

7) Hannun waya masu santsi, 3″ HANNUN KUSUSU - SASHE NA WAYA 3.
jaka ko kwali.
Manyan rubutu
–Ya dace da bututun 1 3/8″ OD*.
- Gina Gine-gine na Aluminum.
– Amfani da Gidaje ko na Kasuwanci Mai Sauƙi.

8) Hannun waya masu santsi, 3″ HANNUN KUSUSU - SASHE NA WAYA 3.
jaka ko kwali.
Manyan rubutu
–Ya dace da bututun 1 3/8″ OD*.
- Gina Gine-gine na Aluminum.
– Amfani da Gidaje ko na Kasuwanci Mai Sauƙi.
- ISO9001.

 
kayan aikin shinge na sarkar haɗin
 
 
Lokacin Saƙo: Yuni-20-2024