Xibka tal-wajer tat-tiġieġ eżagonalihuwa komunement imsejjaħ xibka eżagonali, xibka tat-tjur, jew wajer tat-tiġieġ. Huwa primarjament manifatturat f'azzar galvanizzat u miksi bil-PVC, ix-xibka tal-wajer eżagonali hija soda fl-istruttura u għandha wiċċ ċatt.
Speċifikazzjonijiet komuni ta' malja eżagonali
| XALBA TAL-WAJER EŻAGONALI | |||
| Daqs tal-malja | Dijametru tal-wajer | Wisa' u Tul | |
| Fil-Pulzier | F'MM | F'MM | |
| 3/8” | 9.52mm | 0.42mm – 0.50mm |
Wisa': 0.5m-2.0m Tul: 25m, 30m
Daqsijiet oħra jistgħu jsiru fuq talba |
| 1/2” | 12.7mm | 0.38mm – 0.80mm | |
| 5/8” | 16mm | 0.38mm – 1.0mm | |
| 3/4” | 19mm | 0.38mm – 1.2mm | |
| 1” | 25.4mm | 0.38mm – 1.2mm | |
| 5/4” | 31mm | 0.55mm – 1.2mm | |
| 3/2” | 38.1mm | 0.55mm – 1.4mm | |
|
|
|
| |
| 2” | 50.8mm | 0.55mm – 1.5mm | |
| 3” | 76.2mm | 0.65mm – 1.5mm | |
| 4” | 101.6mm | 1.2mm – 2.0mm | |
Ħin tal-posta: 26 ta' Mejju 2023